I screw the coolant bolt according to the specs, and it seems to leak from the bottom of the air bleeder screw base I have a photo with arrows pointing at the base of the screw because that's where it's leaking from Please, if anyone knows anything, it would help. For a coolant change on the drz you would have to of loosened the coolant drain bolt on the rear brake side of the bike near the water pump This drains the coolant from the motor Some flushing with distilled water should also occur to rinse the passages
After this is done you can take your premixed or mix your own fluid, place the water pump bolt back in and start filling So on the drz, the tank under the airbox isn't actually a reservoir When the engine is cold, there should not be any coolant in that tank Fill the radiator from the cap on the top of the radiator Unless you mean pouring coolant in there makes it dump into the reservoir and then out onto the ground? My buddy dropped off his drz400sm because the oil and coolant are mixing
New head gasket new oem water pump kit i was looking online and the drz has 2 freeze plugs in the head so i figured to look there Well i have had the cooling system pumped up. The fix is real simple and requires removing the. Fixing the coolant leak issue I posted a while back about my e model dripping coolant from around the water pump housing It's gotten worse and now the coolant drains out at a pretty alarming rate
So i guess it's time to fix it I know what's involved in fixing it, but i'm wondering what the consensus is on the proper fix for the issue.
OPEN